John Deere 6466T Troubleshooting
| Engine Model: John Deere 6466T |
| Engine Type: 4-stroke in-line 6-cylinder turbocharged liquid-cooled diesel |
| Total Displacement: 466 cu.in (7.6 L) |
| Rated Engine Power: 144-175 Hp (107-130 kW) at 2200 rpm |
| Fuel System Type: Direct injection |
____________________________________________________________________________________
| Diesel engine hard to start or doesn't start |
Fuel filter plugging - Replace the filter element.
Air in fuel system - Bleed fuel system.
Faulty fuel injection nozzles - Test injection nozzles and change if necessary.
Fuel injection pump is damaged - Change or repair the pump.
Unadjusted valve timing - Correct or replace timing gear.
Fuel pipes are dirty - Service or replace fuel pipes.
Wrong injection timing - Check injection timing adjustment.
Cylinder or piston rings are worn - Change defective components.
| Engine starts but stops suddenly |
Fuel filter element is dirty - Replace filter element.
Fuel injection pump is not working correctly - Rebuild or install a new injection pump.
Air filter element clogged - Carry out maintenance on air filter.
Improper nozzle opening pressure - Adjust as required.
| Engine shuts off while running |
Improper setting of fuel injection pump timing - Adjust as recommended.
Clogged fuel filter - Replace the filter element.
Engine has not warmed up to the recommended temperature - Normalize the temperature by warming up the engine.
Injection nozzles sticking or clogged - Clean or replace injection nozzles.
| Engine stalls when idling |
Low idle speed set incorrectly - Adjust as required.
Excessive valve clearance - Check and adjust as required.
Fuel injection pump is not working correctly - Rebuild or install a new injection pump.
Fuel injection nozzles fault - Clean or replace injection nozzles.
Fuel hoses or lines clogging - Fuel hoses and lines must be clean.
Air filter element clogged - Clean or change.
Cylinder head gasket is blown - Replace cylinder head gasket.
Unadjusted injection timing - Set up as recommended.
Fuel injection pump malfunctioning - Change pump or rebuild it.
One of moving engine parts is faulty - Repair or replace defective components.
Radiator fins are dirty or radiator cap is defective - Clean radiator or replace cap.
Not enough coolant - Add coolant and check the components of cooling system.
Fan belt is loose or defective - Replace as required.
Low engine oil level - Check oil level and add oil as required.
Defective cylinder head gasket - Install a new gasket.
Injection timing is out of adjustment - Use correct injection timing adjustment.
Low crankcase oil level - Check oil level and add oil as required.
Defective oil pump - Replace as required.
Oil filter clogged - Change or service engine oil filter.
Stuck or worn relief valve - Replace or clean relief valve.
Excessive crankshaft bearing clearance - Check and change or repair defective parts.
Crankpin bearing clearance is excessive - Inspect and replace or repair faulty components.
| Engine using too much oil |
Oil leaks: Gaskets or seals can be faulty - Defective components must be replaced.
Incorrect oil viscosity - Use correct viscosity oil.
Piston rings are defective or worn - Have piston rings replaced.
Worn valve guides and valve stems - Install new valves.
Damaged cylinder liners or pistons - Check liners and pistons, install new components as required.
Low coolant temperature - Engine is not warmed up to the required temperature.
Lack of engine oil - Add oil to the engine crankcase.
Timing of fuel injection pump is incorrect - Adjust as recommended.
Worn or scored pistons - Have pistons replaced.
Connecting rod is defective or misaligned - Alignment procedure or replacement is required.
Low battery output voltage - Charge the battery.
Battery does not hold charge - Service charging system or replace battery.
Corroded battery terminals or disconnected wires - Check cables and service or change terminals.
Battery is discharged or worn - Change or recharge battery.
Wiring is incorrectly connected or disconnected - Inspect wiring and connect correctly.
Battery voltage is low - Recharge the battery.
Defective starter motor - Replace or repair starter.
____________________________________________________________________________________
| Industrial Engines Technical Specifications |
| Car Engines Technical Specifications |
| Small Engines Technical Specifications |
| Outboard Engines Technical Specifications |
