GASOLINE AND DIESEL ENGINES SPECIFICATIONS

____________________________________________________________________________________

Home / Small Engines / Honda Engines / Honda GS190

Honda GS190 Maintenance

Engine Model: Honda GS190
Engine Type: 4-cycle 1-cylinder air-cooled gasoline engine
Total Displacement: 11.4 cu.in (187 cc)
Rated Engine Power: 5.2 Hp (3.9 kW) at 3600 rpm
Carburetor Type: Horizontal, butterfly valve

____________________________________________________________________________________

Service Data

Cylinder Bore Inside Diameter (Maximum), in (mm) .............. 2.727 (69.165)
Cylinder Head (Max Out of Flatness), in (mm) .............. 0.002 (0.05)
Intake Valve Clearance, in (mm) .............. 0.0043-0.0075 (0.11-0.19)
Exhaust Valve Clearance, in (mm) .............. 0.0063-0.0094 (0.16-0.24)

Engine Oil and Filter

Engine Oil Type (Summer) .............. SAE 10W-30
Engine Oil Type (Winter) .............. SAE 5W-30
API Service Classifications .............. SF or SG
Oil Capacity, qts (L) .............. 0.58 (0.55)
Air Filter Element Part Number .............. 17211-ZL8-023

Carburetor Adjustment

Main Jet .............. #68
Idle Fuel .............. 1-3/4 turns out
Float Height, in (mm) .............. 0.36 (9.20)
Low Idle Speed, rpm .............. 1400±150
High Idle Speed, rpm .............. 3850±150

Ignition System

Spark Plug Type .............. NGK BPR6ES
Spark Plug Gap, in (mm) .............. 0.028-0.032 (0.70-0.80)
Module Air Gap, in (mm) .............. 0.008-0.024 (0.20-0.60)
Ignition Timing, deg .............. 20 BTDC
Spark Plug Torque, Nm (ft-lbs) .............. 20 (14)

Service Intervals

Check Engine Oil Level .............. Every 10 hours
Clean Air Filter Element .............. Every 50 hours
Change Engine Oil .............. Every 100 hours
Check and Adjust Spark Plug .............. Every 100 hours
Replace Fuel Filter .............. Every 200 hours
Check and Adjust Idle Speed .............. Every 200 hours
Check Carburetor Adjustment .............. Every 200 hours
Check and Adjust Valve Clearance .............. Every 200 hours
Replace Spark Plug .............. Every 200 hours
Replace Air Filter Element .............. Every 200 hours
Clean Combustion Chamber .............. Every 200 hours
Clean Fuel Lines .............. Every 200 hours

Tightening Torques

Crankcase Cover (M6x1.0) .............. 12 Nm (9 ft-lb)
Connecting Rod Bolt (M7x1.0) .............. 12 Nm (9 ft-lb)
Valve Adjusting Lock Nut (M5x0.5) .............. 8 Nm (5.8 ft-lb)
Cylinder Head Cover Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Oil Drain Plug Bolt (M12x1.5) .............. 24 Nm (17 ft-lb)
Flywheel Nut (M14x1.5) .............. 52 Nm (38 ft-lb)
Governor Arm Nut (M6x1.0) .............. 10 Nm (7 ft-lb)
Breather Cover Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Air Cleaner Case Bolt (M6x1.0) .............. 10 Nm (7 ft-lb)
Muffler Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Recoil Starter Nut (M6x1.0) .............. 8.5 Nm (6.1 ft-lb)
Fan Cover Stud Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Fuel Pump Screw (M5x0.8) .............. 3 Nm (2.2 ft-lb)
Oil Level Switch Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Oil Filler Extension Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Spark Plug (M14x1.25) .............. 20 Nm (14 ft-lb)

____________________________________________________________________________________