____________________________________________________________________________________
| Home / Car Engines / BMW Engines / BMW M43TU |
BMW M43TU Troubleshooting
| Engine doesn't start or starts hard |
No fuel in fuel tank - Fill gasoline up.
Low-quality gasoline - Use correct gasoline grade.
Dirty fuel lines - Inspect and clean.
Loose or disconnected spark plug wire - Inspect the spark plug wire connection, replace or repair.
Damaged spark plug - Spark plug need to be replaced.
Defective ignition system - Check ignition and replace faulty components.
Fuel filter is dirty - Install new filter.
Clogged fuel lines - Service fuel lines.
Clogged or damaged fuel pump - Service or replace fuel pump.
Dirty or damaged fuel injectors - Service or change fuel injectors.
Bad engine compression - Inspect cylinder block and replace worn components.
| Engine runs unevenly |
Ignition system problems - Check ignition and replace faulty components.
Air filter element is clogged - Service or change air filter.
Spark plug is faulty - Change spark plug.
Dirty or faulty fuel pump - Service or change fuel pump.
Valve clearance is improper - Adjust to proper valve clearance.
Wrong ignition timing - Set the ignition timing properly.
Improperly adjusted low idle speed - Adjust as required.
| Engine starts and then stalls |
Spark plug is defective - Change spark plug as required.
Clogged or defective fuel injectors - Service or replace fuel injectors.
Ignition coil is faulty - Ignition coil should be replaced.
Broken or loose valve springs - Valve springs need to be changed.
Valves are stuck - Valves must be cleaned.
| Engine keeps overheating |
Low engine oil level - Check and refill engine oil.
Engine overload - Reduce engine load.
Dirty fuel injectors - Clean or change fuel injectors.
Ignition timing is wrong - Ignition timing needs to be set properly.
Incorrect valve setting - Adjust valves correctly.
Defective radiator cap or clogged radiator core - Clean radiator or replace cap.
Low coolant level - The cooling system needs to be refilled and checked for faults.
Thermostat is defective - Thermostat need to be replaced.
Defective water pump - Change water pump.
| Abnormal engine knocking or noise |
Stale or low octane fuel - Use proper fuel.
Engine overloaded - Load reducing is recommended.
Low engine oil level - Check oil level and add oil as required.
Too low idle RPM - Need to adjust idle speed.
Fuel pump is faulty or clogged - Check fuel pump and replace if necessary.
Worn crankshaft or main bearings - Have bearings or crankshaft replaced.
Valve clearance is wrong - Adjust valve clearance.
Cylinder bore or piston rings are worn - Replace faulty parts.
| Engine lacks power |
Clogged or defective fuel injectors - Check fuel injectors and replace if necessary.
Clogged air filter - Clean or change air filter.
Dirty or damaged fuel pump - Clean or change fuel pump.
Defective ignition - Check ignition and replace faulty components.
Worn cylinder head gasket - Replace the head gasket.
Valves are stuck or burned - Service or change valves.
Cylinder block parts are damaged - Change defective components.
Clogged oil filter - Replace or clean oil filter.
| Excessive fuel consumption |
Clogged air filter - Change or service air filter.
Fuel injectors are dirty or defective - Check fuel injectors and replace if necessary.
Faulty or loose spark plug - Spark plug need to be replaced or tightened.
Wrong ignition timing - Set the ignition timing correctly.
Stuck, worn, or burned valves - Clean or replace valves.
Worn sleeve, rings, or piston - Replace faulty parts as required.
Valve clearance is wrong - Adjust valve clearance according to specifications.
Bad engine compression - Inspect cylinder block and replace worn components.
| Excessive oil consumption |
Gaskets or seals are excessively worn - Install new components.
Damaged valve guides or valve stems - Valves replacement required.
Stuck or defective piston rings - Change piston rings.
Worn piston or cylinder liner - Inspect liner and piston, change as necessary.
| Engine backfires |
Clogged fuel injectors - Clean or change fuel injectors.
Clogged fuel lines - Fuel lines need to be cleaned.
Ignition timing is incorrect - Ignition timing needs to be set properly.
Wrong valve setting - Valves needs to be set correctly.
Air filter element is clogged - Clean or replace air filter.
____________________________________________________________________________________