| Home / Lawn Tractors / Toro Tractors / Toro 522Xi |
Toro 522Xi Specifications
The Toro 522Xi is a 2WD garden tractor from 5Xi Series. This model was manufactured from 1998 to 2006. The Toro 522Xi tractor is powered by 41.1 cu.in (674 cc) Kohler Command CH22S 4-cycle V-Twin cylinder horizontal shaft air-cooled gasoline engine with a rated power of 22 hp (16.4 kW). The machine is fitted with two-range Eaton Uni-Drive hydrostatic transmission with infinite forward and reverse gears.
The Toro 522Xi is equipped with a power steering system, electric PTO clutch, mechanical band brakes, 16x7.50-8 front tires, and 23x10.50-12 rear tires. The operating weight is 1025 lbs (463 kg). The tractor is compatible with the following attachments: 44", 48", 54", and 60" mid-mount 3-blade mower deck with mechanical lift system, 42" front-mount two-stage snow blower, 48" front-mount blade, and Toro 79947 front-end loader.
| Engine Specs |
Engine Model ........................ Kohler Command CH22S
Engine Type ........................ 4-cycle V-Twin air-cooled gasoline engine
Number of Cylinders ........................ 2
Displacement, cu.in (cc) ........................ 41.1 (674)
Cylinder Bore, in (mm) ........................ 3.15 (80.0)
Piston Stroke, in (mm) ........................ 2.64 (67.0)
Rated Engine Power, hp (kW) ........................ 22.0 (16.4)
Rated Engine Speed, rpm ........................ 3600
Maximum Torque, Nm (ft-lbs) ........................ 51.8 (38.2)
Torque Speed, rpm ........................ 2200
Idle Speed, rpm ........................ 1150-1300
Compression Ratio ........................ 8.5:1
Fuel System Type ........................ Carburetor
Carburetor Type ........................ One-Barrel, fixed main jet
Fuel Pump Type ........................ Pulse or Mechanical
Governor Type ........................ Mechanical
Lubrication System ........................ Full pressure
Oil Filter Type ........................ Full-flow
Air Cleaner Type ........................ Replaceable, paper element
Ignition System ........................ Electronic
Spark Plug Type ........................ Champion RC12YC
Spark Plug Gap, in (mm) ........................ 0.030 (0.76)
Module Air Gap, in (mm) ........................ 0.011-0.013 (0.28-0.33)
Fuel Tank Capacity, gal (L) ........................ 4.3 (16.0)
Oil Capacity, qts (L) ........................ 2.1 (2.0)
| Electrical System |
Electrical System Rating, Volts ........................ 12
Charging System ........................ Alternator
Alternator Rating, Amps ........................ 15
Starter Type ........................ Electric
Number of Batteries ........................ 1
Battery Rating ........................ 12V, 380 CCA
Electric Ground ........................ Negative
| Power Take-Off |
Front PTO Operational Type ........................ Independent
Front PTO Clutch ........................ Electric
Front PTO Speed, rpm ........................ 3600
| Transmission |
Transmission Model ........................ Eaton Uni-Drive 1100
Transmission Type ........................ Shaft-driven hydrostatic
Number of Forward Gears ........................ Infinite (2-range, Lo-Hi)
Number of Reverse Gears ........................ Infinite (2-range, Lo-Hi)
Oil Capacity, qts (L) ........................ 6.0 (5.7)
Maximum Forward Speed (Low Range), mph (kph) ........................ 4.5 (7.2)
Maximum Forward Speed (High Range), mph (kph) ........................ 7.5 (12.1)
Maximum Reverse Speed (Low Range), mph (kph) ........................ 2.0 (3.2)
Maximum Reverse Speed (High Range), mph (kph) ........................ 3.4 (5.5)
| Wheels and Tires |
Wheel Drive System ........................ 2WD 4x2
Steering Configuration ........................ Front steer
Steering System ........................ Power
Brakes Type ........................ Mechanical band
Front Tire Size ........................ 16x7.50-8
Rear Tire Size ........................ 23x10.50-12
| Dimensions and Weight |
Wheelbase, in (mm) ........................ 52 (1320)
Overall Length, in (mm) ........................ 76.5 (1940)
Overall Height, in (mm) ........................ 45.5 (1150)
Overall Width, in (mm) ........................ 40.5 (1020)
Operating Weight, lbs (kg) ........................ 1025 (463)
| Front End Loader |
Loader Model ...................... Toro 79947
Maximum Lift Height at Pivot Pin, in (mm) ...................... 77 (1950)
Clearance with Bucket Dumped, in (mm) ...................... 66 (1670)
Reach at Maximum Lift Height, in (mm) ...................... 15 (380)
Reach with Bucket on Ground Level, in (mm) ...................... 41 (1040)
Maximum Dump Angle, degrees ...................... 45
Lift Capacity to Max Height at Pivot Pin, lbs (kg) ...................... 350 (160)
Breakout Force at Pivot Pin, lbs (kg) ...................... 520 (235)
Bucket Width, in (mm) ...................... 40 (1010)
Loader Weight, lbs (kg) ...................... 441 (200)
| 44" Mower Deck |
Mower Deck Type ........................ Mid-mount
Number of Blades ........................ 3
Cutting Width, in (mm) ........................ 44 (1110)
Deck Construction ........................ Stamped
Spindle Material ........................ Aluminum
Deck Drive ........................ Belt
Lift System ........................ Hydraulic
| 48" Mower Deck |
Mower Deck Type ........................ Mid-mount
Number of Blades ........................ 3
Cutting Width, in (mm) ........................ 48 (1215)
Deck Construction ........................ Stamped
Spindle Material ........................ Aluminum
Deck Drive ........................ Belt
Lift System ........................ Hydraulic
| 52" Mower Deck |
Mower Deck Type ........................ Mid-mount
Number of Blades ........................ 3
Cutting Width, in (mm) ........................ 52 (1320)
Deck Construction ........................ Stamped
Spindle Material ........................ Aluminum
Deck Drive ........................ Belt
Lift System ........................ Hydraulic
| 60" Mower Deck |
Mower Deck Type ........................ Mid-mount
Number of Blades ........................ 3
Cutting Width, in (mm) ........................ 60 (1520)
Deck Construction ........................ Stamped
Spindle Material ........................ Aluminum
Deck Drive ........................ Belt
Lift System ........................ Hydraulic
| Snowblower |
Snowblower Type ........................ Front-mount, 2-stage
Clearing Width, in (mm) ........................ 42 (1060)
Lift System ........................ Hydraulic
| Front Blade |
Blade Type ........................ Front-mount
Width, in (mm) ........................ 48 (1215)
Lift System ........................ Hydraulic
Angle ........................ Manual
____________________________________________________________________________________
| Garden Tractors Technical Specifications |