| Home / Lawn Tractors / Husqvarna Tractors / Husqvarna YT42XLS |
Husqvarna YT42XLS Specifications
The Husqvarna YT42XLS is a two-wheel drive lawn tractor from YT series. This model was manufactured from 2013 to 2023. The driveline consists of 44.3 cu.in (726 cc) Kawasaki FR691V 4-cycle V-twin cylinder vertical shaft air-cooled gasoline engine with a rated power of 23 Hp (17.3 kW), and belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Husqvarna YT42XLS is equipped with a manual steering system, electric PTO, disc brakes, 16x6.50-8 front tires, and 20x10.00-8 rear tires. The operating weight is 572 lbs (260 kg). The Husqvarna YT42XLS tractor is compatible with a 42" mid-mount 3-blade side-discharge mower deck with a cutting height of 1.5-4.0 in (37-100 mm) and mechanical lift system.
| Engine Specs |
Engine Model ..................... Kawasaki FR691V
Engine Type ..................... 4-cycle vertical-shaft V-twin air-cooled gasoline
Number of Cylinders ..................... 2
Displacement, cu.in (cc) ..................... 44.3 (726)
Cylinder Bore, in (mm) ..................... 3.07 (78.0)
Piston Stroke, in (mm) ..................... 3.00 (76.0)
Engine Power, hp (kW) ..................... 23.0 (17.3)
Rated Engine Speed, rpm ..................... 3600
Idle Speed, rpm ..................... 1400-1600
Maximum Torque, Nm (ft-lbs) ..................... 53.6 (39.5)
Torque Speed, rpm ..................... 2200
Compression Ratio ..................... 8.2:1
Fuel System ..................... Carburetor
Carburetor Type ..................... Internally vented with fuel shut-off solenoid
Lubrication System ..................... Full pressure with spin-on oil filter
Ignition System ..................... Electronic spark ignition
Spark Plug ..................... NGK BPR4ES
Spark Plug Gap, in (mm) ..................... 0.027-0.031 (0.7-0.8)
Intake Valve Clearance, in (mm) ..................... 0.004-0.006 (0.10-0.15)
Exhaust Valve Clearance, in (mm) ..................... 0.004-0.006 (0.10-0.15)
Fuel Tank Capacity, gal (L) ..................... 3.0 (11.5)
Oil Capacity, qts (L) ..................... 2.0 (1.9)
| Electrical System |
Electrical System Rating, Volts ..................... 12
Charging System .................... Alternator
Alternator Rating, Amps ................... 15
Starter Type ..................... Electric
Number of Batteries ..................... 1
Battery Voltage, Volts ..................... 12
Battery, AH ..................... 28
Electric Ground ..................... Negative
| Power Take Off |
PTO Operational Type ..................... Independent
PTO Clutch ..................... Electric
PTO Speed, rpm ..................... 3600
| Transmission |
Transmission Model ..................... Tuff Torq K46
Transmission Type ..................... Belt-driven hydrostatic
Number of Forward Gears ..................... Infinite
Number of Reverse Gears ..................... Infinite
Oil Capacity, qts (L) ..................... 2.8 (2.6)
Maximum Forward Speed, mph (kph) ..................... 5.5 (8.8)
Maximum Reverse Speed, mph (kph) ..................... 2.4 (3.9)
| Wheels and Tires |
Wheel Drive System ..................... 2WD 4x2
Steering Configuration ..................... Front steer
Steering System ..................... Manual
Brakes Type ..................... Disc
Front Tire Size ..................... 16x6.50-8
Rear Tire Size ..................... 20x10.00-8
| Dimensions and Weight |
Wheelbase, in (mm) ..................... 48 (1220)
Overall Length, in (mm) ..................... 69.3 (1760)
Overall Height, in (mm) ..................... 41.5 (1050)
Overall Width, in (mm) ..................... 43.5 (1100)
Ground Clearance, in (mm) ..................... 7 (175)
Operating Weight, lbs (kg) ..................... 572 (260)
| Mower Deck |
Mower Deck Type ..................... Mid-mount
Number of Blades ..................... 3
Cutting Methods ..................... Side discharge
Cutting Deck Type ..................... Stamped, reinforced
Cutting Width, in (mm) ..................... 42 (1070)
Overall Width, in (mm) ..................... 56 (1415)
Cutting Height, in (mm) ..................... 1.5-4.0 (37-100)
Cut positions ..................... 6
Anti-Scalp Wheels ..................... 2
Lift System ..................... Mechanical
____________________________________________________________________________________
| Garden Tractors Technical Specifications |