| Home / Lawn Tractors / Husqvarna Tractors / Husqvarna LTH130 |
Husqvarna LTH130 Specifications
The Husqvarna LTH 130 lawn tractor from LTH Series was manufactured between 1996 and 2003. The Husqvarna LTH130 tractor is powered by Kohler Command CV15S 4-cycle single cylinder vertical shaft air-cooled gasoline engine. A 26 cubic inches (426 cc) engine has a cylinder bore of 3.60" (90 mm), piston stroke of 2.64" (67 mm), and rated power of 13 Hp (9.8 kW). This model is fitted with a belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Husqvarna LTH 130 is equipped with a manual steering system, mechanical PTO, disc brakes, 15x6.00-6 front tyres, and 18x8.50-8 rear tyres. The operating weight is 396 lbs (180 kg). The tractor is compatible with a 42" mid-mount 2-blade side-discharge mower deck with a cutting height of 1.5-4.0 in (38-102 mm) and mechanical lift system.
| Engine Specs |
Engine Model ................... Kohler Command CV15S
Engine Type ................... 4-cycle vertical shaft 1-cylinder gasoline
Number of Cylinder ................... Single
Piston Displacement, cu.in (cc) ................... 26 (426)
Cylinder Bore, in (mm) ................... 3.60 (90.0)
Piston Stroke, in (mm) ................... 2.64 (67.0)
Engine Power, Hp (kW) ................... 13.0 (9.8)
Maximum Torque, Nm (ft-lb) ................... 33.2 (24.5)
Torque Speed, rpm ................... 2400
Low Idle Speed, rpm ................... 1500
Compression Ratio ................... 8.5:1
Fuel System Type ................... Carburetor
Carburetor Type ................... Float fixed main jet
Fuel Pump Type ................... Diaphragm type mechanical pump
Fuel Filter Type ................... In-line
Governor Type ................... Centrifugal mechanical flyweight
Cooling System ................... Air intake
Air Cleaner Type ................... Replaceable, high density paper element
Lubrication System Type ................... Full-pressure
Oil Pump Type ................... Gerotor
Oil Filter Type ................... Full-flow
Ignition System Type ................... Electronic magneto
Spark Plug ................... Champion RC12YC
Spark Plug Gap, in (mm) ................... 0.040 (1.02)
Ignition Module Air Gap, in (mm) ................... 0.008-0.012 (0.20-0.30)
Oil Capacity, qts (L) ................... 1.9 (2.0)
| Electrical System |
Electrical System Rating, Volts ................... 12
Charging System .................... Alternator
Alternator Rating, Amps ................... 8
Starter Type ................... Electric
Number of Batteries ................... 1
Battery Voltage, Volts ................... 12
Battery CCA ................... 190
Battery, AH ................... 25
Electric Ground ................... Negative
| Power Take Off |
PTO Operational Type ................... Independent
PTO Clutch ................... Mechanical
PTO Speed, rpm ................... 3600
| Transmission |
Transmission Model ................... Hydro-Gear
Transmission Type ................... Belt-driven hydrostatic
Number of Forward Gears ................... Infinite
Number of Reverse Gears ................... Infinite
Maximum Forward Speed, mph (kph) ................... 5.5 (8.8)
Maximum Reverse Speed, mph (kph) ................... 2.4 (3.8)
| Wheels and Tires |
Wheel Drive System ................... 2WD 4x2
Steering Configuration ................... Front steer
Steering System ................... Manual
Brakes Type ................... Disc
Front Tire Size ................... 15x6.00-6
Rear Tire Size ................... 18x8.50-8
| Dimensions and Weight |
Wheelbase, in (mm) ................... 47 (1200)
Overall Length, in (mm) ................... 67 (1700)
Overall Height, in (mm) ................... 38 (1020)
Overall Width, in (mm) ................... 48.4 (1225)
Ground Clearance, in (mm) ................... 7 (175)
Operating Weight, lbs (kg) ................... 396 (180)
| Mower Deck |
Mower Deck Type ................... Mid-mount
Number of Blades ................... 2
Cutting Methods ................... Side discharge
Cutting Deck Type ................... Stamped
Cutting Width, in (mm) ................... 42 (1070)
Overall Width, in (mm) ................... 49 (1245)
Cutting Height, in (mm) ................... 1.5-4.0 (38-102)
Cut positions ................... 6
Anti-Scalp Wheels ................... 2
Lift System ................... Mechanical
____________________________________________________________________________________
| Garden Tractors Technical Specifications |