| Home / Lawn Tractors / Husqvarna Tractors / Husqvarna CTH135 |
Husqvarna CTH135 Specifications
The Husqvarna CTH135 lawn tractor from CTH Series was manufactured between 2002 and 2003. The Husqvarna CTH 135 tractor is powered by Briggs and Stratton 31G777 Intek 4-cycle single cylinder OHV vertical shaft air-cooled gasoline engine. A 30.5 cubic inches (500 cc) engine has a cylinder bore of 3.56" (91 mm), piston stroke of 3.06" (78 mm), and rated power of 17.5 Hp (13 kW).
This model is fitted with a belt-driven hydrostatic transmission with infinite forward and reverse gears. The Husqvarna CTH135 is equipped with a manual steering system, mechanical PTO type, disc brakes, 15x6.00-6 front tyres, and 18x8.50-8 rear tyres. The operating weight is 396 lbs (180 kg). The tractor is compatible with a 36" mid-mount 2-blade side discharge mower deck with cutting height of 1.5-4.0 in (38-102 mm) and manual lift system.
| Engine Specs |
Engine Model ................... Briggs and Stratton 31G777 Intek
Engine Type ................... 4-cycle single cylinder OHV vertical shaft air-cooled gasoline
Number of Cylinders ................... 1
Displacement, cu.in (cc) ................... 30.5 (500)
Cylinder Bore, in (mm) ................... 3.56 (91.0)
Piston Stroke, in (mm) ................... 3.06 (78.0)
Rated Engine Power, hp (kW) ................... 17.5 (13.0)
Rated Engine Speed, rpm ................... 3300
Idle Speed, rpm ................... 1750
Cylinder Bore Type ................... Cast iron sleeve
Fuel System Type ................... Carburetor
Carburetor Type ................... Float
Fuel Pump Type ................... Pulse type
Governor Type ................... Mechanical
Lubrication System ................... Oil pump with filter
Air Cleaner Type ................... Dual element
Cooling System ................... Forced air
Ignition System ................... Electronic
Spark Plug Type ................... Champion RC12YC
Spark Plug Gap, in (mm) ................... 0.03 (0.76)
Armature Air Gap, in (mm) ................... 0.010-0.014 (0.25-0.36)
Valve Clearance (Intake), in (mm) ................... 0.003-0.005 (0.08-0.13)
Valve Clearance (Exhaust), in (mm) ................... 0.005-0.007 (0.13-0.18)
Fuel Tank Capacity, gal (L) ................... 2.0 (7.5)
Oil Capacity, qts (L) ................... 1.51 (1.42)
| Electrical System |
Electrical System Rating, Volts ................... 12
Charging System .................... Alternator
Alternator Rating, Amps ................... 15
Starter Type ................... Electric
Number of Batteries ................... 1
Battery Voltage, Volts ................... 12
Electric Ground ................... Negative
| Power Take Off |
PTO Operational Type ................... Independent
PTO Clutch ................... Mechanical
PTO Speed, rpm ................... 3600
| Transmission |
Transmission Model ................... Hydro-Gear 321-0510
Transmission Type ................... Belt-driven hydrostatic
Number of Forward Gears ................... Infinite
Number of Reverse Gears ................... Infinite
Maximum Forward Speed, mph (kph) ................... 5.0 (8.0)
Maximum Reverse Speed, mph (kph) ................... 2.4 (3.8)
| Wheels and Tires |
Wheel Drive System ................... 2WD 4x2
Steering Configuration ................... Front steer
Steering System ................... Manual
Brakes Type ................... Disc
Front Tire Size ................... 15x6.00-6
Rear Tire Size ................... 18x8.50-8
| Dimensions and Weight |
Wheelbase, in (mm) ................... 46.9 (1190)
Overall Length, in (mm) ................... 89 (2260)
Overall Height, in (mm) ................... 40.6 (1030)
Overall Width, in (mm) ................... 36.2 (920)
Turning Radius, in (mm) ................... 16 (407)
Operating Weight, lbs (kg) ................... 396 (180)
| Mower Deck |
Mower Deck Type ................... Mid-mount
Number of Blades ................... 2
Mower Deck Material ................... Steel
Cutting Deck Type ................... Stamped
Cutting Method ................... Side discharge
Cutting Width, in (mm) ................... 36 (920)
Cutting Height, in (mm) ................... 1.5-4.0 (38-102)
Cut positions ................... 6
Blade Engagement ................... Manual
Lift System ................... Mechanical
____________________________________________________________________________________
| Garden Tractors Technical Specifications |