FARM AND GARDEN TRACTORS SPECIFICATIONS
Home / Farm Tractors / International Tractors / International 385

International Harvester 385 Specs

The International Harvester 385 utility tractor was manufactured between 1985 and 1986. The International Harvester 385 tractor is powered by International D155 4-cycle vertical 3-cylinder direct injection naturally aspirated liquid-cooled diesel engine. A 155 cubic inches (2.5 L) engine has a cylinder bore of 3.88" (98 mm), piston stroke of 4.38" (111 mm), and rated power of 46 Hp (34.3 kW).

This model is fitted with several transmission options: 8x4 synchromesh transmission or 8x8 power shuttle transmission. The open center hydraulic system has a gear pump with rated fluid flow of 11.3 gpm (42.8 lpm). The International Harvester 385 is equipped with a hydrostatic power steering system, hydraulic wet disc brakes, 6.00x16 or 9.00x10 front tyres, and 13.6x28 or 18.4x16.1 rear tyres. The operating weight is 4930 lbs (2235 kg).

Engine Specs

Engine Model ................. International Harvester D-155
Engine Type ................. 4-cycle three-cylinder liquid-cooled diesel
Number of Cylinders ................. 3
Displacement, cu.in (L) ................. 155 (2.50)
Cylinder Bore, in (mm) ................. 3.88 (98.0)
Piston Stroke, in (mm) ................. 4.38 (111.0)
Aspiration Type ................. Naturally aspirated
Rated Engine Power, hp (kW) ................. 46.0 (34.3)
Rated Engine Speed, rpm ................. 2200
Idle Speed, rpm ................. 650-2400
Maximum Torque, Nm (ft-lbs) ................. 162 (119)
Torque Speed, rpm ................. 1650
Compression Ratio ................. 16:1
Fuel System ................. Direct injection
Cooling System ................. Liquid-cooled
Fuel Tank Capacity, gal (L) ................. 20.0 (75.7)
Oil Capacity, qts (L) ................. 6.8 (6.4)
Coolant Capacity, qts (L) ................. 12.0 (11.4)
Electrical System Rating, Volts ................. 12
Charging System ................. Alternator
Alternator Rating, Amps ................. 45

Power Take-Off

PTO Operational Type ................. Independent
PTO Power, hp (kW) ................. 35.0 (26.1)
PTO Clutch Type ................. Hydraulic wet disc
PTO Speeds, rpm ................. 540

Standard Transmission

Transmission Type ................. Synchromesh
Gearbox Type ................. 8F/4R
Number of Forward Gears ................. 8
Number of Reverse Gears ................. 4
Clutch Type ................. Dry disc
Oil Capacity, qts (L) ................. 36.0 (34.1)
Maximum Forward Speed, mph (kph) ................. 16.7 (26.8)
Maximum Reverse Speed, mph (kph) ................. 5.2 (8.4)

Optional Transmission

Transmission Type ................. Power shuttle
Gearbox Type ................. 8F/8R
Number of Forward Gears ................. 8
Number of Reverse Gears ................. 8
Clutch Type ................. Dry disc
Maximum Forward Speed, mph (kph) ................. 15.0 (24.2)
Maximum Reverse Speed, mph (kph) ................. 18.9 (30.4)

Wheels and Tires

Wheel Drive System ................. 2WD 4x2
Steering Configuration ................. Front Steer
Steering System ................. Hydrostatic power
Brakes Type ................. Hydraulic wet disc
Front Tire Size (Standard) ................. 6.00x16
Rear Tire Size (Standard) ................. 13.6x28
Front Tire Size (Low-Profile) ................. 9.00x10
Rear Tire Size (Low-Profile) ................. 18.4x16.1

Hydraulic System

Hydraulic System Type ................. Open Center
Implement Pump Flow, gpm (Lpm) ................. 11.3 (42.8)
Steering Flow, gpm (Lpm) ................. 2.5 (9.5)
Hydraulic Capacity, gal (L) ................. 9.0 (34.1)
Hydraulic Pressure, Bar (psi) ................. 172 (2500)
Number of Standard Remote Valves ................. 0/2
3-Point Hitch Category ................. 2/1
Draft Sensing or Lift Control ................. Position and draft control

Dimensions and Weight

Wheelbase (Standard), in (mm) ................. 79 (2000)
Wheelbase (Low-Profile), in (mm) ................. 78.2 (1980)
Length (Standard), in (mm) ................. 140 (3550)
Length (Low-Profile), in (mm) ................. 138 (3500)
Height (Steering Wheel), in (mm) ................. 61 (1540)
Height (ROPS), in (mm) ................. 93.5 (2370)
Overall Width (Standard), in (mm) ................. 73 (1850)
Overall Width (Low-Profile), in (mm) ................. 81 (2050)
Ground Clearance, in (mm) ................. 14.1 (350)
Weight (Standard), lbs (kg) ................. 4930 (2235)
Weight (Low-Profile), lbs (kg) ................. 4870 (2210)

____________________________________________________________________________________

Farm Tractors Technical Specifications
CASE IH 7120 CASE IH CVX175 CASE IH MX240
FORD 2600 FORD 7610 FORD 9600
International 656 International 744 International 826
John Deere 2350 John Deere 4455 John Deere 5300
McCormick C100 Max McCormick CX85 McCormick MC110
Kubota B2100 Kubota B8200 Kubota L2550
Mahindra 1538 Mahindra 2645 Mahindra 5545
Massey Ferguson 656 Massey Ferguson 3070 Massey Ferguson 6140
New Holland T5.130 New Holland TC55DA New Holland TM140