| Home / Farm Tractors / Case IH Tractors / Case IH 9250 |
Case IH 9250 Specifications
The Case IH 9250 is a 4WD articulated tractor from 9200 Series. This model was manufactured from 1990 to 1995. The components of Case IH 9250 powerline system: a 611 cubic inches (10 L) Cummins LTA10 four-stroke six-cylinder turbocharged aftercooled diesel engine with a rated power of 300 hp (223.7 kW), and full powershift transmission with 12 forward and 3 reverse gears.
The maximum travel speed (forward/reverse): 17.3 mph (27.8 km/h) and 8.5 mph (13.7 km/h). The closed center load sensing hydraulic system includes a gear pump with rated fluid flow of 27 gal/min (102.3 l/min). The hydraulic pressure is 172.5 bar (2500 psi). The Case IH 9250 is equipped with a hydrostatic and articulated steering system, hydraulic caliper disc brakes, 20.8x38 front tyres, and 20.8x38 rear tyres. The wheelbase is 131" (3320 mm).
| Engine Specs |
Engine Model .................. Cummins LTA10
Engine Type .................. 4-stroke six-cylinder turbocharged aftercooled diesel
Number of Cylinders .................. 6
Displacement, cu.in (L) .................. 611 (10.0)
Cylinder Bore, in (mm) .................. 4.92 (125.0)
Piston Stroke, in (mm) .................. 5.35 (136.0)
Aspiration Type .................. Turbocharged
Rated Engine Power, hp (kW) .................. 300.0 (223.7)
Rated Engine Speed, rpm .................. 2100
Maximum Torque, Nm (ft-lbs) .................. 1376 (1015)
Torque Speed, rpm .................. 1300
Compression Ratio .................. 16.0:1
Firing Order .................. 1-5-3-6-2-4
Fuel System .................. Direct injection
Fuel Filter Type .................. Spin-on with water separator
Air Cleaner Type .................. Dual paper elements
Oil Filter Type .................. Spin-on full flow
Fuel Tank Capacity, gal (L) .................. 200.0 (757.0)
Oil Capacity, qts (L) .................. 44.0 (41.6)
Coolant Capacity, qts (L) .................. 54.0 (51.1)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
| Power Take-Off |
PTO Operational Type .................. Independent
PTO Power, hp (kW) .................. 266.0 (198.4)
PTO Speed, rpm .................. 1000
PTO/Engine Speed, rpm .................. 1000/2098
| Transmission |
Transmission Type .................. Full powershift
Gearbox Type .................. 12F/3R
Number of Forward Gears .................. 12
Number of Reverse Gears .................. 3
Clutch Type .................. Hydraulic wet disc
Maximum Forward Speed, mph (kph) .................. 17.3 (27.8)
Maximum Reverse Speed, mph (kph) .................. 8.5 (13.7)
| Wheels and Tires |
Wheel Drive System .................. 4WD 4x4
Steering Configuration .................. Front steer
Steering System .................. Hydrostatic and articulated
Brakes Type .................. Hydraulic caliper disc
Front Tire Size .................. 20.8x38
Rear Tire Size .................. 20.8x38
Front Tread, in (mm) .................. 60-130 (1520-3300)
Rear Tread, in (mm) .................. 60-130 (1520-3300)
| Hydraulics and Hitch |
Hydraulic System Type .................. Closed center load sensing, pressure compensating
Implement Pump Flow, gpm (Lpm) .................. 27.0 (102.3)
Hydraulic Pressure, Bar (psi) .................. 172.5 (2500)
Fluid Capacity, gal (L) .................. 18.0 (68.1)
Number of Standard Remote Valves .................. 4
3-Point Hitch Category .................. 3
Lift Capacity at lift pin, lbs (kg) .................. 12750 (5785)
| Dimensions and Weight |
Wheelbase, in (mm) .................. 131 (3320)
Overall Length, in (mm) .................. 272.9 (6930)
Height (Exhaust), in (mm) .................. 143 (3630)
Width (Minimum), in (mm) .................. 93.5 (2370)
Ground Clearance, in (mm) .................. 16.5 (415)
Operating Weight, lbs (kg) .................. 30060 (13635)
____________________________________________________________________________________
| Farm Tractors Technical Specifications |