| Home / Farm Tractors / Case IH Tractors / Case IH 9230 |
Case IH 9230 Specifications
The Case IH 9230 is a 4-wheel drive articulated tractor from 9200 Series. This model was manufactured from 1990 to 1995. The components of Case IH 9230 powerline system: a 504.5 cubic inches (8.3 L) CDC 6CTA 6-cylinder turbocharged aftercooled diesel engine with a rated power of 235 hp (175.2 kW), and full powershift transmission with 12 forward and 3 reverse gears. The maximum travel speed (forward/reverse): 18.6 mph (30 km/h) and 9.1 mph (14.6 km/h).
The closed center load sensing hydraulic system includes a gear pump with rated fluid flow of 28 gal/min (106 l/min). The hydraulic pressure is 172.5 bar (2500 psi). The Case IH 9230 is equipped with a hydrostatic power with articulation and front-axle steering, integrated hydraulic disc brakes, 18.4x38 front tyres, and 18.4x38 rear tyres. The wheelbase is 120.4 inches (3050 mm).
| Engine Specs |
Engine Model .................. CDC 6CTA
Engine Type .................. 4-stroke six-cylinder turbocharged aftercooled diesel
Number of Cylinders .................. 6
Displacement, cu.in (L) .................. 504.5 (8.30)
Cylinder Bore, in (mm) .................. 4.49 (114.0)
Piston Stroke, in (mm) .................. 5.32 (135.0)
Aspiration Type .................. Turbocharged
Rated Engine Power, hp (kW) .................. 235.0 (175.2)
Rated Engine Speed, rpm .................. 2200
Maximum Torque, Nm (ft-lbs) .................. 951 (701)
Torque Speed, rpm .................. 1500
Compression Ratio .................. 16.5:1
Firing Order .................. 1-5-3-6-2-4
Fuel System .................. Direct injection
Fuel Filter Type .................. Spin-on with water separator
Air Cleaner Type .................. Dual paper elements
Oil Filter Type .................. Spin-on full flow
Fuel Tank Capacity, gal (L) .................. 115.0 (435.3)
Oil Capacity, qts (L) .................. 22.0 (20.8)
Coolant Capacity, qts (L) .................. 29.6 (28.0)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
| Power Take-Off |
PTO Operational Type .................. Independent
PTO Power, hp (kW) .................. 207.0 (154.4)
PTO Speed, rpm .................. 1000
PTO/Engine Speed, rpm .................. 1000/2098
| Transmission |
Transmission Type .................. Full powershift
Gearbox Type .................. 12F/3R
Number of Forward Gears .................. 12
Number of Reverse Gears .................. 3
Clutch Type .................. Hydraulic wet disc
Maximum Forward Speed, mph (kph) .................. 18.6 (30.0)
Maximum Reverse Speed, mph (kph) .................. 9.1 (14.6)
| Wheels and Tires |
Wheel Drive System .................. 4WD 4x4
Steering Configuration .................. Front steer
Steering System .................. Hydrostatic and articulated
Brakes Type .................. Integrated hydraulic caliper disc
Front Tire Size .................. 18.4x38
Rear Tire Size .................. 18.4x38
Front Tread, in (mm) .................. 60-130 (1520-3300)
Rear Tread, in (mm) .................. 60-130 (1520-3300)
| Hydraulics and Hitch |
Hydraulic System Type ........ Closed center load sensing (PFC)
Implement Pump Flow, gpm (Lpm) .................. 28.0 (106.0)
Hydraulic Pressure, Bar (psi) .................. 172.5 (2500)
Fluid Capacity, gal (L) .................. 18.0 (68.1)
Number of Standard Remote Valves .................. 4
3-Point Hitch Category .................. 3
Lift Capacity at lift pin, lbs (kg) .................. 12750 (5785)
| Dimensions and Weight |
Wheelbase, in (mm) .................. 120.4 (3050)
Overall Length, in (mm) .................. 241.6 (6130)
Height (Exhaust), in (mm) .................. 129.6 (3290)
Width (Minimum), in (mm) .................. 119.5 (3030)
Ground Clearance, in (mm) .................. 20.5 (520)
Operating Weight, lbs (kg) .................. 24106 (10935)
____________________________________________________________________________________
| Farm Tractors Technical Specifications |