| Home / Farm Tractors / Case IH Tractors / Case IH 9130 |
Case IH 9130 Specifications
The Case IH 9130 is a 4WD articulated tractor from 9100 Series. This model was manufactured by built in Fargo (North Dakota, USA) from 1986 to 1990. The components of Case IH 9130 powerline system: a 505 cubic inches (8.3 L) CDC 6CTA six-cylinder turbocharged diesel engine with a rated power of 220 hp (164 kW), and full power shift transmission with 12 forward and 2 reverse gears. The maximum travel speed (forward/reverse): 17.3 mph (27.9 km/h) and 4.8 mph (7.8 km/h).
The closed center hydraulic system includes an implement pump with rated fluid flow of 18 gal/min (68 l/min). The hydraulic pressure is 172.5 bar (2500 psi). The Case IH 9130 is equipped with a hydrostatic and articulated steering system, hydraulic caliper disc brakes, 18.4x38 front tyres, and 18.4x38 rear tyres. The wheelbase is 124 inches (3140 mm).
| Engine Specs |
Engine Model .................. CDC 6CTA
Engine Type .................. 4-stroke 6-cylinder turbocharged aftercooled diesel
Number of Cylinders .................. 6
Displacement, cu.in (L) .................. 505 (8.30)
Cylinder Bore, in (mm) .................. 4.49 (114.0)
Piston Stroke, in (mm) .................. 5.32 (135.0)
Aspiration Type .................. Turbocharged
Rated Engine Power, hp (kW) .................. 220.0 (164.0)
Rated Engine Speed, rpm .................. 2100
Maximum Torque, Nm (ft-lbs) .................. 970 (715)
Torque Speed, rpm .................. 1500
Compression Ratio .................. 16.5:1
Firing Order .................. 1-5-3-6-2-4
Fuel System .................. In-line injection pump
Cooling System .................. Liquid-cooled
Air Cleaner Type .................. Dual stage
Fuel Tank Capacity, gal (L) .................. 115.0 (435.3)
Oil Capacity, qts (L) .................. 22.0 (20.8)
Coolant Capacity, qts (L) .................. 38.0 (36.0)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
| Power Take-Off |
PTO Operational Type .................. Independent
PTO Power, hp (kW) .................. 190.0 (141.7)
PTO Speed, rpm .................. 1000
PTO/Engine Speed, rpm .................. 1000/2099
| Transmission Configuration |
Transmission Type .................. Full Powershift
Gearbox Type .................. 12F/2R
Number of Forward Gears .................. 12
Number of Reverse Gears .................. 2
Clutch Type .................. Hydraulic wet disc
Maximum Forward Speed, mph (kph) .................. 17.3 (27.9)
Maximum Reverse Speed, mph (kph) .................. 4.8 (7.8)
| Wheels and Tires |
Wheel Drive System .................. 4WD 4x4
Steering Configuration .................. Front steer
Steering System .................. Hydrostatic and articulated
Brakes Type .................. Hydraulic caliper disc
Front Tire Size .................. 18.4x38
Rear Tire Size .................. 18.4x38
Front Tread, in (mm) .................. 60-130 (1520-3300)
Rear Tread, in (mm) .................. 60-130 (1520-3300)
| Hydraulics and Hitch |
Hydraulic System Type .................. Closed center
Implement Pump Flow, gpm (Lpm) .................. 27.0 (102.2)
Hydraulic Pressure, Bar (psi) .................. 172.5 (2500)
Fluid Capacity, gal (L) .................. 18.0 (68.1)
Number of Standard Valves .................. 2/4
3-Point Hitch Category .................. 3
Lift Capacity at lift pin, lbs (kg) .................. 12750 (5785)
| Dimensions and Weight |
Wheelbase, in (mm) .................. 124 (3140)
Overall Length, in (mm) .................. 241.6 (6130)
Height (Exhaust), in (mm) .................. 129.6 (3290)
Width (Minimum), in (mm) .................. 119.5 (3030)
Ground Clearance, in (mm) .................. 20.5 (520)
Operating Weight, lbs (kg) .................. 17600 (7985)
____________________________________________________________________________________
| Farm Tractors Technical Specifications |